I confirm as the builder that the all building works (for alterations and additions to existing buildings) comply with VIC Part 1.2.2 (a) – Energy Efficiency Measures NCC 2016/2019 - Volume 2; or

That all building elements for the construction of a dwelling, as nominated by the First Rate Report have been installed in accordance with the above-mentioned report number and the endorsed plans; and

The construction of the dwelling is a true and correct representation of the building elements identified on the Detailed House Data sheet; and

The construction of the dwelling has included:
A 2,000 litre RAIN WATER TANK (with roof catchment of 50m2) connected to all sanitary flushing systems; or
A SOLAR WATER HEATER system with 60% solar gain.

I confirm that the Bushfire Attack Level (BAL 12.5) for a site has been constructed in accordance with the construction standards, and requirements as specified in the Australia Standard AS 3959 – 2009 (Construction of Buildings in Bushfire-Prone Areas) for the applicable Bushfire Attack Level as specified above.

I confirm that insulation materials have been installed in the walls and roof of the above mentioned property as required by the approved Building Permit drawings and are in conformity with Part 3.12 of the National Construction Code Volume Two and/or Part F of the National Construction Code of Australia Volume One.

I confirm that the waterproofing of all wet area’s (including bathrooms, shower and bath enclosures, balconies, terraces, basements and retaining walls) have been treated and waterproofed in accordance with the endorsed Building Permit documentation and in accordance with the NCC – Building Code of Australia 2016/2019 or current (Volume Two) AS 3740 – 2010 (Waterproofing of wet areas within residential buildings) and any applicable the manufacturer’s technical specifications.

Hereby certify that ALL systems, recommendations references in the relevant fire engineering report have been installed/ completed per approved documents.

Hereby certify that ALL cladding systems installed to the above mentioned project are of non- combustible material tested to AS1530.1 per the approved building permit documentation, manufacturer specifications.

hereby certify that ALL acoustic walls, floors, ceilings, shafts have been installed in accordance with the approved Building Permit drawings and relevant acoustic tests and manufacturer’s specifications including all, connection details, penetrations, sealing and caulking and acoustic treatment to waste and service pipes. All systems have been installed and comply with NCC - BCA Volume Two Part 3.8.6.

hereby certify that ALL bounding walls, floors, ceilings, shafts have been installed in accordance with the approved Building Permit drawings and relevant fire rated tests and manufacturer’s specifications including all, connection details, penetrations, sealing and caulking and fire treatment to waste and service pipes in accordance with the tested prototype under AS 1530 Part 4. All systems have been installed and comply with NCC -BCA Volume 2.

I hereby certify that the party wall system has been installed in accordance with the relevant fire tests, acoustic tests and manufacturer’s specifications.

I confirm as the builder that the CONSTRUCTION of the proposal is a true and correct representation of the endorsed Town Planning drawings (including the building heights, the built form, the protection of the adjoining amenities and the material and colours) and has occurred strictly in accordance with the above-mentioned Town Planning Permit; and

That all CONDITIONS of the above-mentioned Town Planning Permit have been satisfied and implemented to the satisfaction of the Responsible Authority.

I confirm that the all building appliances (hot plates, ovens and cooking canopy) are all installed as per the approved architectural plans.